How To Change The Starter On A 2003 Honda Crv

There is no doubt that starter is an electric motor to connect the battery, which will spin the engine when ignition key is turned to the outset position. Starter Motor allows the engine to "start" and begin running. While, a faulty starter will result in a difficulty in starting the engine. Nearly people don't know when should replace starter, you can click our previous article "7 common reason why your car won't start" . Yous can too test the lights, radio, and horn to confirm what's happen to your starter.

Honda CRV starter is a primal component to the automobile every bit a whole. 2003-2010 Honda CRV every bit one of the most pop model, we would similar to share the repair guide for 2003-2007 Honda CRV Starter 2.4L Replacement . Also, this guide is too apply to Honda Accord 2.4L/ Honda Chemical element starter replacement.

How Much Does a Honda CRV Starter Replacement Price?

You have to consider the costs of the repair itself, since this job is pretty much suited for a mechanic. So, the boilerplate costs typically run about $400 to $500 , depending on your expanse. The Honda CRV starter itself tin can cost anywhere from as low as $50 to every bit much equally $100 , typically based on which brand yous want to buy. You lot can shop Honda CRV Starter on HexAutoParts.com! You lot can follow these steps to set up your starer:

Tools Yous Need Prepare:

• Replacement starter motor
• Socket prepare
• Wrench gear up
• Hydraulic jack
• Jack stands
• Protective eyewear and gloves
• Flashlight
• Screwdriver prepare

Note: Take a couple pictures before your starting time taking stuff off so that we tin get it dorsum easy.

1> Get-go thing nosotros should disconnect the battery negative terminal. Elevator the hood and remove the negative battery cable from the bombardment making certain the cable end is clear of the bombardment to avoid an accidental connexion.

2> Side by side remove the intake tube from the throttle body going to the air filter box, yous do not demand to remove the air filter box.

3> And then, we need to remove intake manifold. At that place are 12 mm vi bolts and nuts that is property the intake manifold. Two on the height and 3 on the lesser of the intake manifold. Also, one 12 mm bolts intake manifold bracket that is holding in place, remove it.

4> If you want to remove intake manifold that you need brand room for it. We can remove the beam above the battery. It is non difficult, just remove half-dozen bolts.

5> Finally, nosotros tin observe the Honda CR-V Starter. There are two starter bolts 1 xiv mm bolt on the top and 1 17 mm commodities on the bottom we need remove.

6> Once the old starter has been removed, friction match the replacement unit to ensure a proper installation.

vii>  After cleaning the mounting surfaces thoroughly, gently install the starter motor. (Annotation: Starters contain magnets which are brittle and can crack hindering the starter performance if not handled advisedly.)

8> After all starter bolts have been installed, utilize a socket or wrench to tighten evenly and insert the positive bombardment cable onto the starter solenoid.

9> When reconnecting the negative bombardment cable, speedily (lightly) touch and release the cable to battery last, this quick check tests for a brusque excursion. Though a light (little) spark is normal, a big "zap" means there is a problem with the starter installation.

10> Once the job is complete, plough the ignition key to check the starter operation, if the starter does not work or makes abnormal noises, recheck the job wiring and starter mounting bolts.

Source: https://www.hexautoparts.com/blog/how-to-repair-2003-2007-honda-crv-honda-accord-starter-24l-replacement-guide.html

Posted by: mintonglage1957.blogspot.com

Share this post